Posts
Ideas for Fixing Leaking Basement
It's common to see cracks in basement walls for any house that is older than two year due to drying shrinkage, thermal movement, and other causes. Other causes usually are minor and result in few problems. But over time, even minor cracks can grow larger and cause big headaches, such as loss of structural integrity or, more commonly, water leakage. Poured concrete foundations often crack simply because of settling.
If the crack grows or the foundation wall is deflected, the advice of a structural engineer may be required. Common areas for a shrinkage concrete crack to develop are under a basement window, in the middle of a long wall or where the foundation steps down. Once the concrete cracks it is possible for water to leak into a basement through the crack.
Neat Ideas For Basement Renovations
Several suggested methods are:
The most effective is to perform an injection of polyurethane foam into the basement crack. Polyurethane foams are injected into the basement crack in a liquid form. This allows a gentle and slow filling process of the basement crack that will completely fill the crack. After a few minutes the polyurethane will begin to react with the water in the crack to begin foaming.
In most cases homeowners can now have these cracks fixed permanently without the need for costly, disruptive excavation using low-pressure injection of epoxy or polyurethane foam repair materials. Even if a crack is not leaking now, eventually water will find it, said by a manufacturer of epoxies and polyurethane foams for all types of foundation crack repair.
Creating a New Space With Unique Basement Ideas
The Midwest, crack injection has been an accepted way of tackling these repairs for many years, and more and more foundation repair contractors around the country are adopting the technique because it is cost-effective, reliable, and permanent. Another very good method to fix your basement leaking program is DryTrak, which is designed to remove seepage from the floor-wall joint.
Epoxy seals DryTrak to the top of the basement floor.In a baseboard system, weep holes are drilled into the floor-wall joint or directly into the wall if it is a block wall. A system of hollow, durable vinyl baseboard is then epoxied to the floor. Please note that DryTrak is not recommended for basements that may have leaking floor cracks, unleveled floors, or severely cracked floors.
